Scala DCP Shear Pin, Single

Used for Dynamic Cone Penetration (Scala) Testing. Supplied as part of complete kit or available to purchase individually. Complies with NZS 4402.6.5.2.

Downloads

Geo-Con Flyer

Replacement Instructions

SKU: 16-T0012/A5.CON Category: Dynamic Cone Penetrometer (Scala) Tag: Geo-Con

Description
Request a quote

Product Description

Description

The upper slide bar is fixed into the anvil with polyurethane shear pins, which act to reduce wear and tear, and which will shear if the DCP is back-hammered, pulling the slide bar from
the anvil. The slide bar will never break-off inside the anvil during normal use, and the shear pins are easily replaceable in the field.

Accessories

Scala DCP Kit Components:

16-T0012/A1.CON	1 x Scala DCP Hammer/Anvil Assembly
16-T0012/A2.LOC	1 x Scala DCP Helmet
16-T0012/2C.CON	1 x Scala DCP Extension Rod 1m, 50mm Divisions
16-T0012/1.LOC	1 x Scala DCP Cone
16-T0012/A3.LOC	2 x Scala DCP Grub Screws
16-T0012/A4.LOC	1 x Scala DCP Allen Key, Long Series
16-T0012/A5.CON	4 x Scala DCP Shear Pins
16-T0012/S.CON	1 x Scala DCP Spanner (pair)